Stringer repairs can vary significantly depending on the construction, extent of damage, and surrounding structure, so each repair should be evaluated on a case-by-case basis. The following guidance provides a general approach.
For soft wood stringers, TotalBoat Penetrating Epoxy Sealer can be used to penetrate and harden the wood to some extent. However, a soft or compromised wood stringer should still be replaced or sistered with a new wood stringer as needed. The repaired area should then be fiberglassed to reinforce the structure.
For fiberglass stringers, remove the damaged material and rebuild the affected area using TotalBoat Clear High Performance Epoxy with 1708 fiberglass. One method is to build the area back up with layers of epoxy and 1708 fiberglass. Another method is to apply an initial layer of 1708, fill most of the remaining depth with epoxy thickened with milled fibers, then finish the repair with additional Clear High Performance Epoxy and 1708 fiberglass.
Comments
0 comments
Please sign in to leave a comment.