Jocelyn Teixeira
- Total activity 191
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
What is the maximum heat tolerance of cured TotalBoat Traditional 5:1 Marine Epoxy?
TotalBoat Traditional 5:1 Marine Epoxy Resin Kits will begin to soften at approximately 120–125°F.
-
Which TotalBoat epoxy is durable enough to use in an inlay on a floor that will receive foot traffic?
TotalBoat Clear High Performance Epoxy is a good choice for floor inlays.
-
Does TotalBoat Penetrating Epoxy Sealer with cold weather hardener cure clear?
Yes, the cold weather TotalBoat Penetrating Epoxy Sealer with cold weather hardener has a clear finish once fully cured. While the cold weather hardener has an amber color to it, the mixed epoxy sh...
-
Can TotalBoat Traditional 5:1 Marine Epoxy be used in automotive fiberglass repairs?
Yes, TotalBoat Traditional 5:1 Marine Epoxy can be used in automotive repairs when used with fiberglass and/or fillers.
-
Can TotalBoat Traditional 5:1 Marine Epoxy be used in automotive fiberglass repairs?
Yes, TotalBoat Traditional 5:1 Marine Epoxy can be used in automotive repairs when used with fiberglass and/or fillers.
-
Can Traditional 5:1 Marine Epoxy be used to restore wood?
Yes, TotalBoat Traditional 5:1 Marine Epoxy can be used to restore wood. It can be used to fill thin cracks and shallow voids. However, it will not effectively penetrate rotten wood.For soft or rot...
-
Can Traditional 5:1 Marine Epoxy be used to restore wood?
Yes, TotalBoat Traditional 5:1 Marine Epoxy can be used to restore wood. It can be used to fill thin cracks and shallow voids. However, it will not effectively penetrate rotten wood.For soft or rot...
-
Can TotalBoat Traditional 5:1 Marine Epoxy be applied underwater?
No, TotalBoat Traditional 5:1 Marine Epoxy cannot be applied underwater or on wet surfaces.The epoxy is waterproof once fully cured. Allow 5 to 7 days for a complete cure before exposing the surfac...
-
Is TotalBoat Traditional 5:1 Epoxy resistant to high heat?
No, TotalBoat Traditional 5:1 Epoxy is not resistant to high heat. It will begin to soften at approximately 125 °F when using the slow hardener, and at approximately 120 °F when using the fast hard...
-
Can TotalProtect be applied over TotalFair?
Yes, TotalBoat TotalProtect Epoxy Barrier Coat Primer can be applied over properly prepared TotalBoat TotalFair Epoxy Fairing Compound.To prepare the surface, sand with 80–120 grit and clean thorou...