Jocelyn Teixeira
- Total activity 191
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
Can TotalBoat Wet Edge Topside Paint be applied over TotalBoat TotalProtect Epoxy Barrier Coat Primer?
Yes, TotalBoat Wet Edge Topside Paint can be applied over TotalBoat TotalProtect Epoxy Barrier Coat Primer.Allow the TotalProtect to cure for 5–7 days under normal conditions, sand smooth with 220-...
-
What is the coverage of TotalBoat Thixo 2:1 Epoxy Adhesive System?
TotalBoat Thixo 2:1 Epoxy Adhesive System has an approximate coverage of 15 lineal feet when applied as a 1/4" x 1/4" bead.
-
Do you need to apply primer to fiberglass before applying TotalBoat Wet Edge Topside Paint?
No, applying primer to fiberglass before applying TotalBoat Wet Edge Topside Paint is not required. However, to ensure good adhesion, it is best to apply primer before applying topside paint.
-
Do you need to apply primer to fiberglass before applying TotalBoat Wet Edge Topside Paint?
No, applying primer to fiberglass before applying TotalBoat Wet Edge Topside Paint is not required. However, to ensure good adhesion, it is best to apply primer before applying topside paint.
-
Is it necessary to apply eight coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer?
Apply a minimum of 6–8 coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer. The more coats of varnish applied, the longer you can go before needing to recoat.To varnish over epoxy, first...
-
Is it necessary to apply eight coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer?
Apply a minimum of 6–8 coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer. The more coats of varnish applied, the longer you can go before needing to recoat.To varnish over epoxy, first...
-
What is the working time for TotalBoat Fathom Deep Pour Epoxy Resin?
The working time of TotalBoat Fathom Deep Pour Epoxy Resin is approximately 4–6 hours at 77 °F. The working time is affected by the mass of the mixed epoxy.
-
Can TotalBoat Aluminum Boat Barrier Coat Primer be used to seal rivets?
No, TotalBoat Aluminum Boat Barrier Coat Primer is not recommended for sealing rivets. While it may provide a temporary seal for a leaky rivet, the leak is likely to return over time.TotalBoat Alum...
-
Can TotalBoat Wet Edge Topside Paint be used on aluminum boats?
Yes, TotalBoat Wet Edge Topside Paint can be applied to properly prepared and primed aluminum. To prepare the aluminum, sand with 80 grit and apply TotalBoat Etch Wash as directed. As soon as the s...
-
What is the minimum temperature that will allow TotalBoat Thixo 2:1 Epoxy Adhesive System to cure properly?
The minimum temperature that will allow TotalBoat Thixo 2:1 Epoxy Adhesive System to cure properly is 55°F. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { ...