Jocelyn Teixeira
- Total activity 197
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
Do you need to apply primer to fiberglass before applying TotalBoat Wet Edge Topside Paint?
No, applying primer to fiberglass before applying TotalBoat Wet Edge Topside Paint is not required. However, to ensure good adhesion, it is best to apply primer before applying topside paint.
-
What can be used to tint gelcoat?
TotalBoat Pigment Dispersions can be used to tint gelcoat. Always use tints that are safe for use with polyester resins.Other options are universal-type pigment dispersions and pigment dispersions ...
-
Is it necessary to apply eight coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer?
Apply a minimum of 6–8 coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer. The more coats of varnish applied, the longer you can go before needing to recoat.To varnish over epoxy, first...
-
Is it necessary to apply eight coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer?
Apply a minimum of 6–8 coats of varnish over TotalBoat Clear Penetrating Epoxy Sealer. The more coats of varnish applied, the longer you can go before needing to recoat.To varnish over epoxy, first...
-
What is the working time for TotalBoat Fathom Deep Pour Epoxy Resin?
The working time of TotalBoat Fathom Deep Pour Epoxy Resin is approximately 4–6 hours at 77 °F. The working time is affected by the mass of the mixed epoxy.
-
Can TotalBoat Aluminum Boat Barrier Coat Primer be used to seal rivets?
No, TotalBoat Aluminum Boat Barrier Coat Primer is not recommended for sealing rivets. While it may provide a temporary seal for a leaky rivet, the leak is likely to return over time.TotalBoat Alum...
-
Can TotalBoat Wet Edge Topside Paint be used on aluminum boats?
Yes, TotalBoat Wet Edge Topside Paint can be applied to properly prepared and primed aluminum. To prepare the aluminum, sand with 80 grit and apply TotalBoat Etch Wash as directed. As soon as the s...
-
What is the minimum temperature that will allow TotalBoat Thixo 2:1 Epoxy Adhesive System to cure properly?
The minimum temperature that will allow TotalBoat Thixo 2:1 Epoxy Adhesive System to cure properly is 55°F. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { ...
-
Can TotalBoat Halcyon Water-Based Marine Varnish Gloss and Satin be mixed together to create a semigloss finish?
Yes, TotalBoat Halcyon Water-Based Marine Varnish Gloss and Satin can be mixed together to create a semigloss finish. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ ...
-
Should the surface be primed before applying TotalBoat Outdrive AF Prop and Outdrive Antifouling Paint?
Yes, it is best to apply a primer like TotalBoat TotalProtect Epoxy Primer or TotalBoat Aluminum Barrier Coat Epoxy Primer before applying TotalBoat Outdrive AF Prop and Outdrive Antifouling Paint....