Jocelyn Teixeira
- Total activity 197
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
Where can I find the SDS for TotalBoat Flotation Foam?
Safety Data Sheets can be emailed to you. To request the SDS for TotalBoat 2-Part Polyurethane Marine Flotation Foam, call 800-497-0010 or email info@totalboat.com. { "@context": "https://schema....
-
Is TotalBoat TableTop Epoxy thinner than TotalBoat High Performance Epoxy?
No, TotalBoat TableTop Epoxy is more viscous than TotalBoat High Performance Epoxy.TableTop mixed viscosity at 77°F: 2,250 cPHigh Performance mixed viscosity with slow or medium hardener at 77°F: 6...
-
Can TotalBoat TotalBuff Rubbing Compound be used on wood?
TotalBoat TotalBuff Rubbing Compound can be used on hard coatings such as varnish, paint, epoxy, and gelcoat, but it is not intended for use on bare wood. { "@context": "https://schema.org", "@...
-
What is the overcoat time for TotalBoat Topside Primer?
The dry time to overcoat for TotalBoat Topside Primer depends on environmental conditions during the curing process. 90 °F: 1 hour 70 °F: 2 hours 50 °F: 4 hours Other factors, such as humidity and ...
-
How can I use TotalBoat Plastic Paint Pails and Epoxy Mixing Cups to measure epoxy?
TotalBoat Plastic Paint Pails and Epoxy Mixing Cups have 4 measurement guides to help you measure out the correct ratio of resin to hardener in the same cup. The guides are printed on the sides of ...
-
When using TotalBoat TableTop Epoxy on MDF, should you prime the surface?
Yes, when coating MDF, it is good practice to apply a thin coat of TotalBoat TableTop Epoxy to seal the substrate.TotalBoat Penetrating Epoxy Sealer can also be used as a low-viscosity seal coat. {...
-
What bottom paint is recommended for the hull of an aluminum boat that will be in the water up to a week at a time?
Check out TotalBoat Krypton Copper-Free Antifouling Bottom Paint or TotalBoat AlumiPaint AF Aluminum Antifouling Paint. For aluminum hulls, the paint must be copper-free.
-
Can you use a foam roller to apply bottom paint?
Yes, you can use a foam roller to apply TotalBoat Bottom Paint. A foam roller with a thin nap will give you a smoother finish, but it may be necessary to apply more coats to achieve the proper film...
-
Which paint is most suitable for the interior of aluminum duck boat?
For a flat sheen and traditional camo-style colors, use TotalBoat Aluminum Boat Topside Paint.For a gloss finish in traditional yacht colors, use TotalBoat Wet Edge Topside Paint.If you need a text...
-
What is the maximum heat tolerance of cured TotalBoat Traditional 5:1 Marine Epoxy?
TotalBoat Traditional 5:1 Marine Epoxy Resin Kits will begin to soften at approximately 120–125°F.