Lindsay Eckenrode
- Total activity 77
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 10
Articles
Recent activity by Lindsay Eckenrode-
TotalBoat Aluminum Boat Paint Instruction Sheet and TDS
{ "@context": "https://schema.org", "@type": "TechArticle", "headline": "TotalBoat Aluminum Boat Paint Instruction Sheet and TDS", "name": "TotalBoat ...
-
What is the viscosity of TotalBoat Clear High Performance with slow hardener?
TotalBoat Clear High Performance Epoxy with Slow Hardener has the following viscosities at 77 °F: High Performance Resin: 1000 cP High Performance Slow Hardener: 400 cP
-
Can you use water-based tints with Totalboat Gelcoat?
No, water-based tints are not compatible with TotalBoat Gelcoat.To achieve proper color and performance, use a polyester resin–safe pigment that is compatible with gelcoat, such as TotalBoat Pigmen...
-
What is the square foot coverage of TotalBoat Fathom Deep Pour Epoxy?
One mixed gallon of TotalBoat Fathom Deep Pour Epoxy will cover approximately 0.8 sq ft at a 2" depth. The maximum recommended pour depth is 2" for larger slab pours. Given that 1 cubic foot equals...
-
Which type of fairing compound has a better shelf life: epoxy or polyester?
TotalBoat TotalFair Epoxy Fairing Compound has a minimum shelf life of one year.The minimum shelf life for TotalBoat Polyester Fairing Compound is six months when stored in dry, cool conditions bel...
-
How long should you leave TotalBoat Fathom Deep Pour Epoxy in a pressure pot to remove air bubbles?
Allow TotalBoat Fathom Deep Pour Epoxy to set in a pressure pot for at least 24 to 36 hours to help eliminate any trapped bubbles.
-
Can you apply TotalBoat Wet Edge Topside Paint over TotalBoat TotalTread Non-Skid Marine Deck Paint?
Yes, TotalBoat Wet Edge Topside Paint can be applied over TotalBoat TotalTread Non-Skid Marine Deck Paint.Before applying, make sure the TotalTread surface has dried completely. Clean the area thor...
-
What is used to clean up TotalBoat Gleam Marine Spar Varnish varnish?
To clean up tools and any spilled or dripped varnish, use TotalBoat Dewaxer & Surface Prep Solvent, TotalBoat Brushing Thinner 100, or TotalBoat Spray Thinner 101.Once the varnish has fully cured, ...
-
What is used to clean up TotalBoat Gleam Marine Spar Varnish varnish?
To clean up tools and any spilled or dripped varnish, use TotalBoat Dewaxer & Surface Prep Solvent, TotalBoat Brushing Thinner 100, or TotalBoat Spray Thinner 101.Once the varnish has fully cured, ...
-
Should Alodine treatment be removed from metal before applying TotalBoat Aluminum Boat Etch Wash Cleaner and Conditioner?
No, you should not remove an Alodine treatment from aluminum before applying TotalBoat Aluminum Boat Etch Wash Cleaner and Conditioner. Etching is not required on Alodine-treated surfaces and may s...