Yes, TotalBoat Inflatable Boat Bottom Paint can be applied to wood. Follow the preparation instructions for wood listed below.
- Wood should be in good condition, dry, and free of any grease, oils, tar, dust, wax, or other potential contaminants prior to sanding.
- Mask off any areas that are not to be painted with JD Select antifouling paint.
- Use an appropriate seam compound for use below the waterline, as needed, to ensure that all seams are filled and smooth.
- Sand the wood with 80-grit sandpaper until the surface is even and smooth.
- Vacuum away any sanding dust and wipe the surface clean with a clean cotton rag dampened with TotalBoat Brushing Thinner 100, then follow with a clean, dry cotton rag.
- Apply 1 coat of TotalBoat TotalProtect as directed. Allow TotalProtect 4 hours of drying time, then apply 2 coats of Inflatable Boat Bottom Paint as directed. Do not thin with water for this application.
Comments
0 comments
Please sign in to leave a comment.