How should TotalBoat Lust Rapid Recoat Marine Spar Varnish be applied with a spray gun?

Jocelyn Teixeira
  • Updated

For most spray applications, reduce TotalBoat Lust Marine Spar Varnish by 10-25% or more, as needed, with TotalBoat Spray Thinner 101. Always use the minimum amount of spray thinner necessary to achieve the highest gloss finish and promote the fastest dry times. The actual percentage of reduction will depend on the equipment being used and environmental conditions.

Spray Method Pressure Tip Size
Airless Spray Approximately 170 bar / 2500 psi 0.33-0.41 mm / 11-16 thousandths
Pressure Pot Gun pressure: 3.44-4.47 bar / 50-65 psi
Pot pressure: 8-10 psi		 0.89-1.4 mm / 35-50 thousandths
Siphon Cup Gun pressure: 3.44-4.47 bar / 50-65 psi 1.5-1.8 mm / 60-70 thousandths

Comments

0 comments

Please sign in to leave a comment.