Jocelyn Teixeira
- Total activity 197
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
Does TotalBoat carry a durable clear finish for exterior doors?
Yes, TotalBoat Halcyon Water-Based Marine Varnish in Clear Gloss is a durable finish with UV inhibitors. A minimum of 8 coats is recommended for outdoor applications. { "@context": "https://schem...
-
Is TotalBoat TotalGold Gold Metallic Paint a solvent-based paint?
Yes, TotalBoat TotalGold Gold Metallic Paint is a solvent-based paint. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "...
-
What is the cure time for TotalBoat Traditional 5:1 Epoxy?
The full cure time for TotalBoat Traditional 5:1 Marine Epoxy is 3–5 days at 75°F. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What is th...
-
How can gelcoat without wax fully cure while exposed to air?
A surfacing agent, such as a liquid wax additive, can be added to TotalBoat Gelcoat without wax in the last coat to allow the gelcoat to fully cure hard. You can also apply a final coat of gelcoat ...
-
Can Totalboat TotalBond CA Glue bond to HDPE?
Yes, TotalBoat TotalBond CA Glue will adhere to HDPE.
-
Is there a maximum time that TotalBoat JD Select Water-Based Bottom Paint can sit before launching?
There is no maximum dry time for TotalBoat JD Select Water-Based Bottom Paint. This means a boat can remain out of the water for an extended period after the paint has been applied, without affecti...
-
How much pressure will TotalBoat 2 LB. Density Flotation Foam exert in an enclosed space?
TotalBoat 2 LB. Density Flotation Foam will expand tremendously by volume. In doing so, it can exert as much as 5 psi of pressure in contained areas. This is enough pressure to lift the deck off a ...
-
Can TotalBoat Wet Edge Topside Paint be applied over TotalBoat TotalProtect Epoxy Barrier Coat Primer?
Yes, TotalBoat Wet Edge Topside Paint can be applied over TotalBoat TotalProtect Epoxy Barrier Coat Primer.Allow the TotalProtect to cure for 5–7 days under normal conditions, sand smooth with 220-...
-
What is the coverage of TotalBoat Thixo 2:1 Epoxy Adhesive System?
TotalBoat Thixo 2:1 Epoxy Adhesive System has an approximate coverage of 15 lineal feet when applied as a 1/4" x 1/4" bead.
-
Do you need to apply primer to fiberglass before applying TotalBoat Wet Edge Topside Paint?
No, applying primer to fiberglass before applying TotalBoat Wet Edge Topside Paint is not required. However, to ensure good adhesion, it is best to apply primer before applying topside paint.