Jocelyn Teixeira
- Total activity 482
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
Can epoxy be applied to polyurethane?
Epoxy can be applied to properly prepared polyurethane. Before applying, sand the surface with 220-grit sandpaper, clean with denatured alcohol, and allow the surface to dry. It is always recommend...
-
What fiberglass cloth should be used for a transparent finish on wood?
For a clear finish that shows the wood grain, use 4-ounce fiberglass cloth. Heavier-weight cloths will allow light to pass through, but they tend to be less transparent. { "@context": "https://sc...
-
Why is the epoxy beading while curing?
Typically, beading or fisheye is caused by some form of contamination on the substrate. Waxes, oils, or silicone can repel epoxy molecules, resulting in an uneven coating. { "@context": "https://...
-
Why is TotalBoat Halcyon Water-Based Marine Varnish cloudy?
TotalBoat Halcyon Water-Based Marine Varnish will appear cloudy when first applied, but it will dry clear. If the cloudiness remains, it is likely that the varnish was applied too thick. { "@cont...
-
Can TotalBoat Polyester Fairing Compound be used to fill cracks?
Yes, TotalBoat Polyester Fairing Compound can be used to fill small gelcoat cracks above the waterline after following the steps below. Completely clean, degrease, and dewax the area to be repaired...
-
Which TotalBoat products can be used to paint an inflatable boat?
For antifouling paint, use TotalBoat Inflatable Boat Bottom Paint. If the surface has not already been painted, lightly and thoroughly scrub the area with a bronze wool pad dipped in TotalBoat Epox...
-
How can I clean my hands after using TotalBoat Gleam Marine Spar Varnish?
Orange pumice-type soaps are good for cleaning hands after using products like TotalBoat Gleam Marine Spar Varnish. Wearing gloves when using Gleam varnish is recommended. { "@context": "https://...
-
Is TotalBoat Aluminum Boat Leak Sealer typically used with fiberglass?
No, TotalBoat Aluminum Boat Leak Sealer is not typically used with fiberglass, as it is too viscous to properly saturate the fiberglass. { "@context": "https://schema.org", "@type": "FAQPage", ...
-
What can be used to repair cracks on aluminum boats?
TotalBoat Aluminum Boat Leak Sealer can be used to fill small cracks and repair small leaks. For structural cracks, a proper aluminum weld or aluminum repair should be performed. { "@context": "h...
-
What is the difference between fast and slow hardener?
The specifics depend on the product system, but generally, the hardener you choose will impact the working time. Slow hardeners are preferred in warmer conditions to extend the working time, while ...