Jocelyn Teixeira
- Total activity 197
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
Can TotalBoat Epoxy be applied on top of Sheet Molding Compound (SMC)?
Yes, TotalBoat Epoxy can be applied on top of SMC. While SMC has a mold release agent which can make adhesion difficult, epoxy can still be used effectively with careful preparation. The most impor...
-
Is Totalboat Polyester Resin considered a GP resin or an ISO resin?
TotalBoat Polyester Resin is an Ortho GP resin which is commonly used for marine applications, mold making, and applications that require high resistance to chemicals, heat, and water.ISO resin (Is...
-
Can TotalBoat Penetrating Epoxy Sealer be applied on top of stain?
All stains are different, so we recommend performing a test in a small inconspicuous spot to ensure the TotalBoat Penetrating Epoxy Sealer will properly adhere. Note that Penetrating Epoxy will not...
-
How long should TotalBoat ThickSet Cast and Coat Deep Pour Epoxy cure before demolding?
For best results, allow the epoxy to cure for at least 24 hours before attempting to demold projects made with TotalBoat ThickSet Cast + Coat Deep Pour Epoxy. Removing molds too early can compromis...
-
What does limited food contact mean?
Limited food contact means food can come into contact with the cured epoxy surface. Some TotalBoat epoxies are BPA-free and safer for limited food contact after a full and proper cure.An example of...
-
At 70 degrees, how much MEKP is recommended to catalyze Gelcoat?
The recommended amount of MEKP needed to catalyze TotalBoat Gelcoat depends on the amount of gelcoat being catalyzed and the ambient temperature.Refer to the guide on page 5 of the technical data s...
-
Is TotalBoat Inflatable Boat Bottom Paint light gray?
No, TotalBoat Inflatable Boat Bottom Paint is medium gray. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What color is TotalBoat Inflat...
-
How much epoxy is dispensed from TotalBoat Clear High Performance Epoxy 2:1 pumps?
The TotalBoat Clear High Performance Epoxy resin pump dispenses 20 cc, and the hardener pump dispenses 10 cc. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { ...
-
Can TotalBoat Outdrive AF Prop and Outdrive Antifouling Paint be applied to a powder coated metal surface?
Yes, TotalBoat Outdrive AF Prop and Outdrive Antifouling Paint can be applied to a powder-coated metal surface. Sand the surface with 80-grit sandpaper to scuff it up, then clean with TotalBoat Dew...
-
Can you add Penetrol to TotalBoat Krypton Copper-Free Antifouling Bottom Paint?
Adding Penetrol to TotalBoat Krypton Copper-Free Antifouling Bottom Paint is not recommended because it may affect the antifouling properties of the paint. We recommend using TotalBoat Brushing Thi...