Jocelyn Teixeira
- Total activity 197
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 76
Articles
Recent activity by Jocelyn Teixeira-
How should you fix Gelcoat blisters re-applying Gelcoat?
Grind out gelcoat blisters to create a beveled edge. If the area is wet, allow it to dry completely before making repairs. Clean the area with acetone, then fill the blister with TotalBoat Polyeste...
-
What color does TotalBoat Polyester Resin dry?
TotalBoat Polyester Laminating Resin and TotalBoat Polyester Finishing Resin are blue and cure to a translucent buff/tan color. { "@context": "https://schema.org", "@type": "FAQPage", "mainEn...
-
How long after applying TotalBoat Polyester Fairing Compound can gelcoat be applied?
Gelcoat can be applied over TotalBoat Polyester Fairing Compound once it becomes tacky. This will take approximately 15 to 30 minutes, depending on how much catalyst is used. { "@context": "https...
-
How long do I have to wait to apply TotalBoat Wet Edge Topside Paint to Epoxy?
It is best to allow 5 to 7 days for the epoxy to fully cure before applying TotalBoat Wet Edge Topside Paint. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { ...
-
What is the Recoat time for TotalBoat ThickSet Cast + Coat Deep Pour Epoxy without Sanding?
The minimum time to recoat TotalBoat ThickSet Cast + Coat Deep Pour Epoxy without sanding is 4 hours at 70°F. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { ...
-
Can you use Duratec with Totalboat Gelcoat?
Duratec can be used with TotalBoat Gelcoat without wax at a ratio of 10-25% Duratec to gelcoat. The mixture should be catalyzed at 1-2%. { "@context": "https://schema.org", "@type": "FAQPage", ...
-
Can you Measure TotalBoat TotalProtect Epoxy Barrier Coat Primer by weight?
Yes, TotalBoat TotalProtect Epoxy Barrier Coat Primer can be measured by weight. The mix ratios are listed below.Gray: 5.61:1, which is 5.61 parts base to 1 part curing agent, or 85.01% base to 14....
-
Is TotalBoat Wood Honey Food Safe Wood Finish UV stable?
No, TotalBoat Wood Honey Food Safe Wood Finish is not UV stable. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Is Tot...
-
Can TotalBoat Penetrating Epoxy Sealer be machined?
Once TotalBoat Penetrating Epoxy Sealer has been applied to soft wood and is fully cured, it can be machined, shaped, and sanded. { "@context": "https://schema.org", "@type": "FAQPage", "main...
-
Will epoxy or glue stick to TotalBoat TotalTread Non-Skid Marine Deck Paint?
Yes, both glue and epoxy will adhere to TotalBoat TotalTread Non-Skid Marine Deck Paint. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question...