Eric Boudreau
- Total activity 91
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 1
- Subscriptions 19
Articles
Recent activity by Eric Boudreau-
Achieving a Transparent Finish on a Wood Strip Kayak with TotalBoat epoxy
For achieving a transparent finish on a wood strip kayak, consider using our Clear High Performance Epoxy system. This 2:1 epoxy system is well-suited for wooden boat constructions not only because...
-
Applying TotalBoat TotalTread over TotalBoat TotalFair: A Step-by-Step Guide
While TotalBoat TotalTread non-skid marine deck paint is entirely compatible with TotalBoat TotalFair epoxy fairing compound, it is advisable to first prime with TotalBoat Topside Primer or TotalB...
-
Enhancing Durability: Applying TotalBoat Halcyon Satin Over TotalBoat Aluminum Boat Paint.
Enhance the protection of TotalBoat Aluminum Boat Paint by applying TotalBoat Halcyon Satin. While the impact on overall durability is uncertain, adding Halcyon Satin will provide a robust clear co...
-
How to Address Sticky Spots in TotalBoat TableTop Epoxy Applied on Wood Countertops
Sticky spots on epoxy surfaces indicate areas that have not cured properly. Several factors can lead to epoxy not curing as intended: Incorrect Mix Ratio: It is crucial to maintain the correct mi...
-
What is the optimal Application Thickness for TotalBoat FixWood?
When using TotalBoat FixWood epoxy putty, there is no specific maximum thickness limit for application. However, it is recommended to apply FixWood in stages for voids deeper than 1 inch. This appr...
-
Is Chlorine Present in TotalBoat ThickSet Epoxy Resin?
TotalBoat ThickSet Epoxy is formulated without chlorine in its resin composition. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": { "@type": "Question", "name"...
-
Mixing TotalBoat TableTop Epoxy: Can it be done using a drill mixer?
It is not recommended to mix TotalBoat TableTop Epoxy with a drill mixer. Drill mixers are more suitable for lower viscosity epoxy products due to the high-speed mixing that can introduce air bubbl...
-
Is TotalBoat Flotation Foam Flammable?
Both the 2lb. and 6lb. versions of TotalBoat Flotation Foam 2-part marine polyurethane foam are classified as non-flammable substances, whether in their unmixed liquid state or as fully cured foam.
-
Can the TotalBoat Razzo Acrylic Liquid component be reconstituted after freezing?
The acrylic liquid component of TotalBoat Razzo should reconstitute once it thaws. If there is some separation, mixing or shaking the acrylic liquid should make it uniform again. If the crylic Liqu...
-
Can TotalBoat Razzo be turned on a lathe?
Fully cured TotalBoat Razzo castings can be turned on a lathe. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": { "@type": "Question", "name": "Can TotalBoat Ra...