Lindsay Eckenrode
- Total activity 102
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 10
Articles
Recent activity by Lindsay Eckenrode-
Is charcoal pigment compatible with TableTop epoxy?
Charcoal pigments, particularly mica-based charcoal pigments, are generally compatible with epoxy. We recommend performing a test sample to ensure the best results. { "@context": "https://schema.or...
-
Are TotalBoat epoxy systems dishwasher safe?
TotalBoat epoxies are not dishwasher safe. Typical dishwasher temperatures of 130°F to 140°F, and sanitizing temperatures that can reach 180°F, exceed the acceptable high-heat limits of TotalBoat e...
-
Will TotalStrip remove Topside primer?
Yes, TotalBoat TotalStrip Paint Remover will remove TotalBoat Premium Marine Topside Primer. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "...
-
What is the minimum cure time for light use on either ThickSet or Artist Resin?
The minimum cure time for TotalBoat ThickSet Cast + Coat Deep Pour Epoxy and TotalBoat Artist Resin at 65°F to 75°F is 48 hours. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity"...
-
How long does high performance need to cure before it can be sanded?
At 77°F, TotalBoat Clear High Performance Epoxy can be sanded after approximately 16 hours when using Slow Hardener, 12 hours with Medium Hardener, and 6 hours with Fast Hardener. Cooler temperatur...
-
Do we sell a EPA approved bottom paint?
EPA-approved marine antifouling paints include widely used, regulated options that control copper leaching or use alternative biocides to protect against marine growth. All paints sold in the Unite...
-
What kind of brush should I use with Spartan?
A good-quality natural bristle brush works best for applying TotalBoat Spartan Bottom Paint. For simple touch-up and hard-to-reach areas, a chip brush works well. Double-thick chip brushes will lea...
-
Can you apply tung oil to penetrating epoxy?
Tung oil should not be applied over TotalBoat Penetrating Epoxy Sealer. This is not recommended. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name...
-
Can Penetrating Epoxy be used below the waterline?
TotalBoat Penetrating Epoxy Sealer can be used above or below the waterline. However, sealing planks on a wooden boat is not recommended unless the entire hull is completely sealed on both the insi...
-
Can Penetrating Epoxy be used below the waterline?
TotalBoat Penetrating Epoxy Sealer can be used above or below the waterline. However, sealing planks on a wooden boat is not recommended unless the entire hull is completely sealed on both the insi...