The tables below display data for TotalBoat epoxy products and other resins. For application details for a specific TotalBoat resin product, refer to the Technical Data Sheet for that product. This information can be found on the product page.
TotalBoat Resin Mix Ratios and Recommended Application Temperature Ranges
|
TotalBoat Product |
Mix Ratio by Volume |
Mix Ratio by Weight |
Minimum Application Temperature (°F) |
Maximum Application Temperature (°F) |
|
High Performance Epoxy 2:1 Slow |
2:1 |
100:45 |
55 |
90 |
|
High Performance Epoxy 2:1 Medium |
2:1 |
100:45 |
55 |
90 |
|
High Performance Epoxy 2:1 Fast |
2:1 |
100:46 |
55 |
80 |
|
Traditional 5:1 Epoxy Slow |
5:1 |
100:18 |
50 |
90 |
|
Traditional 5:1 Epoxy Fast |
5:1 |
100:18 |
50 |
90 |
|
Traditional Crystal Clear Epoxy |
3:1 |
100:27 |
60 |
105 |
|
Traditional Tropical Extra Slow Epoxy |
3:1 |
100:28 |
70 |
105 |
|
TableTop Epoxy |
1:1 |
100:83 |
70 |
80 |
|
MakerPoxy Epoxy |
1:1 |
100:84 |
70 |
80 |
|
ThickSet Epoxy |
3:1 |
100:28 |
65 |
80 |
|
ThickSet Fathom Epoxy |
2:1 |
100:43 |
60 |
80 |
|
Penetrating Epoxy (regular formula) |
2:1 |
100:44 |
65 |
90 |
|
Penetrating Epoxy (cold weather formula) |
2:1 |
100:47 |
40 |
65 |
|
FlexEpox Flexible Epoxy Adhesive |
1:1 |
1.2:1 |
40 |
125 |
|
TotalFair Epoxy Fairing Compound |
1:1 |
100:90 |
50 |
100 |
|
Cast N Turn Urethane |
1:1 |
1:1 |
65 |
80 |
|
Polyurethane Flotation Foam 2 LB Density |
1:1 |
100:109 |
60 |
85 |
|
Polyurethane Flotation Foam 6 LB Density |
1:1 |
100:100 |
60 |
85 |
TotalBoat Resin Pot Life, Working Time, Tack Free Time, and Cure Time
|
TotalBoat Product |
Pot Life |
Working Time (minutes) |
Tack Free Time (hours) |
Cure Time (days) |
|
High Performance Epoxy 2:1 Slow |
24 - 30 min @ 77°F, 150g mass |
N/A |
5 |
5 |
|
High Performance Epoxy 2:1 Medium |
17-22 min @ 77°F, 150g mass |
N/A |
3 |
3.5 |
|
High Performance Epoxy 2:1 Fast |
10-14 min @ 77°F, 150g mass |
N/A |
2 |
2 |
|
Traditional 5:1 Epoxy Slow |
18-24 min @ 75°F, 150g mass |
90 |
10 |
1-4 |
|
Traditional 5:1 Epoxy Fast |
10-14 min @ 75°F, 150g mass |
60 |
6 |
1-4 |
|
Traditional Crystal Clear Epoxy |
18 -20 min @ 75°F, 150g mass |
180-240 |
10-15 |
3-5 |
|
Traditional Tropical Extra Slow Epoxy |
46 minutes @ 75°F, 150g mass |
180-240 |
20-24 |
4-7 |
|
TableTop Epoxy |
35 - 45 min@ 77°F, 150g mass |
20 |
N/A |
3-5 |
|
MakerPoxy Epoxy |
55 - 75 min @ 77°F, 150g mass |
10-60** |
4-6 (⅛” - ¼” pours) |
5-7 |
|
ThickSet Epoxy |
10-15 minutes** |
45-60** |
4-8 |
5-7 |
|
ThickSet Fathom Epoxy |
1-4 hours** |
60** |
24-48 |
3-7 |
|
Penetrating Epoxy (regular formula) |
20 minutes, 150g mass |
45-50 (thin film) |
36-48 (thin film) |
2-4 |
|
Penetrating Epoxy (cold weather formula) |
10-15 minutes |
45 |
4-24 |
4 |
|
FlexEpox Flexible Epoxy Adhesive |
40 minutes @ 72°F, 100g mass |
75 |
3-4 |
1 (for high load use) |
|
TotalFair Epoxy Fairing Compound |
N/A |
15-60 |
1-4 |
3-5 |
|
Cast N Turn Urethane |
12 min @ 77°F, 100g mass |
15 Mins for 100g mass |
24-36 hrs ⅓” casting |
|
|
Polyurethane Flotation Foam 2 LB Density |
20-40 SECONDS |
RISE TIME: 400 SECONDS |
7-20 MINUTES |
N/A |
|
Polyurethane Flotation Foam 6 LB Density |
20-40 SECONDS |
RISE TIME: 240 SECONDS |
5-15 MINUTES |
N/A |
** Dependent on mixing mass, material temperature, ambient temperature, mixing time, speed of mixing, speed of application & casting and coating thickness.
Comments
1 comment
Is it ok if I made a mistake when mixing 2:1 epoxy 1:1? So I did do some lamenting 1:1 on some 1708.
Please sign in to leave a comment.